13 / 145
Comet H3530 - Thermometer hygrometer with Ethernet interface and relays
Comet H3530 - Thermometer hygrometer with Ethernet interface and relays Transmitters and Regulators Comet Singapore Distributor, Supplier, Supply, Supplies | Mobicon-Remote Electronic Pte Ltd
Quantity
Download Files
Cometsystem_H3530.pdf (1.65 MB)
code: H3530
Humidity, temperature, humidex Ethernet sensor with two relay outputs.
 

Sensor H3530 is designed for online monitoring of temperature, relative humidity, humidex of air without aggressive substances. Three binary inputs to detection of two-states signals are the advantage. Other devices are controlled by two relay outputs.

High precision capacitive polymer sensor ensures excellent long term calibration stability and ultimate accuracy. Measured values are also converted to other humidity interpretation: humidex, dew point temperature, absolute humidity, specific humidity, mixing ratio and specific enthalpy.

Included in delivery:

  • H3530 sensor
  • Traceable calibration certificate
  • Quick start manual
  • Technical support at discussion forum
Technical parameters Value
Output Ethernet
Measured Value Temperature + Relative Humidity
Construction Type Ambient Air
Design Industrial
Temperature Measuring Range -30 to 80 °C
Relay Output Yes
Two-State Input Yes
Lcd Display Yes
PoE No
Relative humidity range 0 to 100%
Accuracy of relative humidity measurement ±2.5% relative humidity from 5 to 95% at 23°C
Accuracy of temperature output ±0.4°C
Resolution 0.1°C, 0.1%RH
Measuring interval 2s
Available temperature units degrees Celsius, degrees Fahrenheit
Computed values humidex, dew point, absolute humidity, specific humidity, mixing ratio, specific enthalpy
Accuracy and range of dew point temperature output - for more details see graphs in manual ±1.5°C at ambient temperature T<25°C and RH>30%
range -60 to +80°C
Temperature compensation of the humidity sensor all temperature range
Temperature operating range -30 to +80°C
IP protection IP40
Number of relay outputs 2
Maximum switching voltage, current and power of relay output 50V, 2A, 60VA
Number of binary inputs 3
Signal for binary inputs dry contact, open collector or two-state voltage signal.
Inputs are not galvanically isolated.
Audible alarm built-in beeper - switchable
LAN connection RJ-45 connector, 10Base-T or 100Base-TX
Communication protocols WWW, ModbusTCP, SNMPv1, SOAP, XML
Alarm protocols E-mail, SNMP Trap, Syslog
Configuration WWW interface, T-Sensor
Power 9 to 30Vdc, maximum consumption 1W
Power connector co-axial, diameter 5.5 x 2.1mm
Dimensions 136 x 213 x 45mm (W x H x D), stem length 75mm
Weight approximately 360g

Optional accessories

Description
AC/DC adapter 230Vac to 12Vdc/0.5A
plastic sensor protection with stainless filter (gray)
PTFE sensor protection, white
sintered bronze sensor cover
Vessel for adjustment and calibration of humidity
Humidity Standard 10%RH, set 5pcs
Humidity Standard 80%RH, set 5pcs
The LD-12 flood detector
The optical smoke detector SD-280
Motion detector JS20
Magnetic door contact SA-200-A
Magnetic door contact with cable length 2m
Magnetic door contact with cable length 5m
Magnetic door contact with cable length 10m
Magnetic door contact with cable length 15m
Magnetic door contact with cable length 20m
Magnetic door contact with cable length 30m
Power detector SP008
Tool for easy connection to WAGO terminals 233 for serial output transmitters
KIT-GSM with modem
TL-POE10R - PoE splitter

Switch To Desktop Version