Comet H0430 temperature transmitter and regulator with RS485 output
Comet H0430 temperature transmitter and regulator with RS485 output Transmitters and Regulators Comet Singapore Distributor, Supplier, Supply, Supplies | Mobicon-Remote Electronic Pte Ltd
Quantity
Download Files
Cometsystem_H0430.pdf (557.98 KB)
code: H0430
Ambient temperature transmitter with two relay outputs. Outdoor, indoor use.
 

Built-in temperature sensor.

Temperature transmitter is equipped with three two-state inputs for detection of  two-state signals - e.g. power presence, water, smoke, airflow, glass break detection, door contact.

Included in delivery:

  • H0430 sensor
  • Traceable calibration certificate
  • Quick start manual
  • Technical support at discussion forum

Technical parameters Value
Output RS485
Measured Value Temperature
Construction Type Ambient Air
Design Industrial
Temperature Measuring Range -30 to 80 °C
Relay Output Yes
Two-State Input Yes
Lcd Display Yes
PoE No
Maximum switching voltage, current, power of relay output 50V, 2A, 60VA
Audible alarm from built-in beeper - switchable
Accuracy of temperature output ±0.4°C
Available temperature units degrees Celsius, Fahrenheit
Signal for binary inputs dry contact, open collector or two-state voltage signal.
Inputs are not galvanically isolated.
Minimum pulse length at binary input 500 ms
Voltage at open contact 3.3 V
Low voltage level 0 to +0.5 V
High voltage level +3.0 to +30V
Temperature operating range -30 to +80°C
Temperature operating range of LCD display readable to operating temperature +70°C, it is recommended to switch OFF the LCD over +70°C
Communication protocol ModBus RTU, ARION and Advantech ADAM compatible protocol
Communication speed 110 to 115200 Bd
IP protection IP65
Power 9-30Vdc, power consumption approximately 1W
Dimensions 136 x 191 x 45 mm (W x H x D), stem length 53 mm
Weight approximately 350g

Optional accessories

Description
AC/DC adapter 12V/450mA stabilized
The LD-12 flood detector
The optical smoke detector SD-280
Motion detector JS20
Magnetic door contact SA-200-A
Magnetic door contact with cable length 2m
Magnetic door contact with cable length 5m
Magnetic door contact with cable length 10m
Magnetic door contact with cable length 15m
Magnetic door contact with cable length 20m
Magnetic door contact with cable length 30m
Power detector SP008
Tool for easy connection to WAGO terminals 233 for serial output transmitters
Converter USB/RS485 for MS5

 

Switch To Desktop Version